OIL IMPREGNATING FOR THE TREATMENT OF INDOOR PARQUET
Safflower oil, sunflower oil, hemp oil, castor oil, boiled linseed oil, raw linseed oil, tung oil, linseed stand oil, poppy seed oil, propolis, drying agents, lemon oil, earths / oxides.
COROLLE is a blend of various oils of plant origin for treating and protecting parquet, whose components have been selected based on environmentally friendly criteria to achieve a natural treatment.
COROLLE may be used equally on all wooden surfaces, whether brushed, planed, jagged or smooth surfaces. COROLLE has the characteristic of being able to soak deep into the wood, becoming an integral part of it, giving it extraordinary strength and hardness. It maintains the original breathability virtually unchanged, resulting in osmotic exchange from the solid wood to the environment and vice versa.
Mix well before and during the use. If you use coloured COROLLE make sure that the colour has not settled at the bottom. Always use at temperatures above +15°C. Factors affecting the timing of the intervention are temperature, ventilation and environmental humidity. Apply COROLLE using a fleece or applicator (a thin layer), one coat is usually enough. IMPORTANT: maintain consumption of approximately 1 l. per 20/25 sqm. After approximately one or two hours (at 22°C) go over the surface with a single-brush floor cleaner fitted with a beige disk. This procedure accelerates polymerisation of the oils and aids penetration. After approximately 30 minutes rub again with in order to remove any excess product evening the surface. If you are working at very high temperatures and with excessive ventilation, the waiting time decreases, whereas if you work without ventilation and at low temperatures the waiting time increases. Do not wet the surface until oil curing is complete. IMPORTANT: One coat is usually enough, a second coat is only necessary on very porous wood. On very compact wood we recommend diluting COROLLE with CHEMSOL-C. After at least 3 days continue or complete the treatment with LINFOLEGNO, LINFO-OPAX OPR or CERA ANTICA. Always run some test applications before applying it to the definitive surfaces.
- It highlights the softness, transparency and naturalness of wood.
- Easy restoration with no colour discrepancies.
- Healthier living environments.
- Excellent resistance to wear.
- The original breathability is almost unaltered.
- Free from electrostatic charges.
- It does not release harmful substances during application or after.
DILUTION: It is ready to use, if required it can be diluted with Chemsol C, Terpene or white spirit
DRYING/WALKABLE: after 24 hours.
TIME OF REACTION: 3 weeks.
YIELD: Relative to absorption, approximately 20/24 sqm/l per coat
HOW TO CLEAN EQUIPMENT: Wash with Chemsol-C, white spirit, terpene, turpentine.
STORAGE: Closed in the original packaging, in a cool place away from frost and UV rays, it retains its properties for at least one year.
6 1-litre cans.
4 5-litre tins.
2 10-litre tins.
SPECIFIC WEIGHT (20° C): 0.942 kg/l.
SOLUBILITY IN WATER: insoluble
COLOUR: as showed in color folder
VOC (Directive 2004/42/EC) : Minimal build wood stains.
VOC given in g/litre of product in a ready-to use condition : Limit value: 700,00 (2010)
VOC of product : 22,07
RISK OF SPONTANEOUS COMBUSTION:
once used, cloths, rags or anything soaked in oil must be immersed in water in a tightly sealed container, or hang them without overlapping them and once dry store them in a suitable tightly closed container.
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP).
No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.